WILL IT FIT?
The Model 3 runs the same V2 Universal plate as the Model Y — one plate across the 3/Y family. The Model 3 frunk is the smaller of the two, so height clearance matters more here. Plate geometry below is the production CAD. The closed-hood clearance map is being measured right now with the same crush-gauge method we used for theCybertruck guide.
Rail slots of 16.9″ and 25.5″ across the plate, plus two vertical accessory rails at the outboard ends that V1 didn't have.
Standard 16″ AR builds clear the closed Model Y frunk in our low-profile mounts. The Model 3's shallower frunk is being measured now — check back or ask us before ordering tall optics.
The 15-point closed-hood height map — same crush-gauge method as the Cybertruck guide — is in progress. Numbers publish here as soon as they're measured.
THE PLATE, IN 3D
The V2 Universal Model 3/Y plate — actual production CAD. Drag to rotate, scroll to zoom. Note the vertical accessory rails at each end.
MEASURE YOUR BUILD NOW — 3 STEPS
- Measure overall length. End to end, as configured for storage — folded, collapsed, whatever state it rides in.
- Measure the tallest point. Lay the item flat the way it mounts. Measure from the bottom of the surface that contacts the mount straight up to the highest point, then add ~1.5″ for the mount cradle standoff.
- Hold onto both numbers. When the clearance map publishes, you'll compare them here — or send them to us now and we'll tell you directly.
Not sure it fits? Ask us — include your firearm/gear model and optic, and we'll confirm against real installs. Different vehicle? Custom Shop.